Facility & logistics

310 Emig Rd, bay by bay

Four minutes from I-83, a paved apron, three wash bays, a rebottling cell and about 2,900 units on the ground. If you want to understand how a tote gets graded, start with the floor plan.

Request line

Book a yard visit

Customers and suppliers are welcome during yard hours. Tell us when and we will have a forklift and a yard hand assigned.

First name *

Last name *

Email *Business or personal — disposable addresses are rejected

Phone *US or Canada only — 10 digits including area code

Company

City

State / ProvinceTwo letters — must match the postal code

Postal code *US ZIP (17406 or 17406-1234) or Canadian (K1A 0B1)

Quantity *Whole units, 1 – 100,000

Grade

Product type *

Select service *

Message

Required fields are marked *. We reply by email only — this company runs no phone line, which keeps every quote written down and traceable. Your details are never sold or shared.

Start a request

The route a container takes through the site

1 — Scale house and inbound gate. Every load crosses a certified scale before anything is unloaded. The declaration is checked against the manifest and against the UN plate on the first three units off the trailer. A load whose paperwork disagrees with its plates does not come off the truck.

2 — Quarantine row. Inbound stock sits in a dedicated row, split edible-prior from industrial-prior, until it has passed the inspection bench. The two rows never share a forklift attachment, a dunnage rack or a wash bay.

3 — Inspection bench. Backlight, sniff, cage square-check with a frame gauge, pallet probe for rot and delamination, valve function, gasket condition. Grades A, B, C, cage-only or scrap are assigned here by the inspector, in writing, before anyone sees a price.

4 — Wash bays. Bay 1 is the dedicated food line and never sees an industrial-prior container. Bays 2 and 3 run the general programme from three-stage rinse up to hot caustic clean-in-place. The full sequence is on the reconditioning line page.

5 — Rebottling cell. Cages that outlived their bottles are straightened on a press jig, re-galvanised where needed, and fitted with new blow-moulded bottles. This cell alone keeps roughly 48 tons of galvanised steel a year out of the scrap stream.

6 — Test, fit and mark. Pressure and leak test, new valve, new gaskets, new lid, dust cap, then the reconditioner mark with our code and the month and year of reconditioning.

7 — Racking and photography. Graded stock is racked two high by grade and capacity. Every unit is photographed on the rack, and those photographs are what you receive with a quote — not a stock image.

8 — Loading. One dock-height door and two ground-level, with three forklifts to 8,000 lb. A 48-foot flatbed takes 40 totes single-stacked or 80 in two tiers where the product and the destination allow it.

Site specification

Address310 Emig Rd, York, PA 17406

Yard area4.1 acres

Covered process area18,400 sq ft

Wash bays3 (one food-dedicated)

Rebottling cell1, press-jig equipped

Units on the ground≈ 2,900

Racked positions1,640

Forklifts3 (to 8,000 lb)

Reach truck1

Dock doors1 dock-height, 2 ground

Certified scaleOn site

Water loopSettling + DAF + 25 µm

Roof array48 kW

Nearest interstateI-83 exit 24, 4 min

See the wash line in detail

Freight

We run our own lanes, which is why delivered prices make sense

Totes are cheap and enormous. Load factor and backhaul availability move delivered cost more than unit price ever will.

Typical transit from York, PA — our own equipment
Lane	Distance	Transit	Mode	Notes
York → Philadelphia	95 mi	Same day	Flatbed / van	Daily backhaul availability
York → Baltimore / DC	60–95 mi	Same day	Flatbed / van	Dedicated weekly slot
York → Pittsburgh	200 mi	Next day	Flatbed	Two runs most weeks
York → New York / NJ	175 mi	Next day	Van	Appointment-based delivery
York → Columbus, OH	390 mi	1–2 days	Flatbed	Backhaul pricing common
York → Charlotte, NC	450 mi	2 days	Flatbed	Partner carrier south of Richmond
Lower 48, elsewhere	—	3–6 days	Partner LTL / FTL	Quoted per lane on request

Transport & freight

Modes, load factors, lift-gate options and what a tote actually costs to move.

Open

Site cleanouts

When the problem is 300 weathered totes stacked behind a building.

Open

Directions & hours

Driver instructions, gate times and the approach from every direction.

Open

Why York County

It is an accident of founding that turned out to be an advantage. York sits inside a day's drive of roughly a third of the US population and at the intersection of three things this trade needs: dense food and beverage manufacturing in Lancaster and Berks counties, chemical blending along the I-83 and I-81 corridors, and a very large agricultural customer base that wants cheap, sound, non-potable containers by the dozen.

The practical effect is short collection radii and high backhaul availability. We rarely run an empty truck in either direction, which is both the reason our delivered pricing is competitive and a meaningful part of the environmental argument.

Visiting

Walk-ins are welcome during yard hours. Pickups need an appointment so that stock is pulled, photographed and staged before you arrive rather than while you wait.

Check in at the scale house on the right as you enter.
Hi-vis and closed-toe footwear past the yellow line — we keep spares.
Engines off while loading; no cab occupancy under a raised load.
Bring a copy of your order or quote reference; everything in our system is indexed by it.

Hours, holidays and directions from every direction are on the Contact Us page.

Keep reading

Capacity, equipment and coverage

What the site can physically do, and how far it reaches.

4.1 acresyard areapaved apron + stone hardstand

18,400sq ft covered process areathree bays + rebottling cell

1,640racked positions≈ 2,900 units on the ground

≈ 180units per day through the wash line72 hr gate-to-graded

3forklifts to 8,000 lb, plus a reach truck1 dock-height, 2 ground doors

48 kWroof array over the wash buildingrenewable tariff site-wide

Transit from York, PA — 25 lanes
Destination	Distance	Transit	Mode	Equipment	Backhaul pricing
Harrisburg / Lancaster, PA	35 mi	Same day	Flatbed / van	Own	Frequent
York / Hanover, PA	12 mi	Same day	Flatbed	Own	Daily
Philadelphia, PA	95 mi	Same day	Flatbed / van	Own	Daily
Allentown / Reading, PA	80 mi	Same day	Flatbed	Own	Frequent
Pittsburgh, PA	200 mi	Next day	Flatbed	Own	Twice weekly
Baltimore, MD	60 mi	Same day	Flatbed / van	Own	Daily
Washington, DC	95 mi	Same day	Van	Own	Frequent
Northern NJ / NYC	175 mi	Next day	Van	Own	Frequent
Wilmington, DE	75 mi	Same day	Flatbed	Own	Weekly
Richmond, VA	230 mi	Next day	Flatbed	Own	Weekly
Norfolk, VA	300 mi	1–2 days	Flatbed	Own	Occasional
Buffalo / Rochester, NY	300 mi	1–2 days	Flatbed	Own	Weekly
Columbus, OH	390 mi	1–2 days	Flatbed	Own	Common
Cleveland, OH	350 mi	1–2 days	Flatbed	Own	Occasional
Charlotte, NC	450 mi	2 days	Flatbed	Partner	Occasional
Atlanta, GA	700 mi	2–3 days	Flatbed	Partner	Rare
Chicago, IL	650 mi	2 days	Flatbed	Partner	Occasional
Detroit, MI	450 mi	2 days	Flatbed	Partner	Occasional
Boston / New England	400 mi	2 days	Van	Partner	Occasional
Nashville, TN	700 mi	2–3 days	Flatbed	Partner	Rare
Dallas / Houston, TX	1,450 mi	3–4 days	Flatbed	Partner	Rare
Denver, CO	1,700 mi	4 days	Flatbed	Partner	No
Phoenix, AZ	2,200 mi	5 days	Flatbed	Partner	No
California	2,700 mi	5–6 days	Flatbed	Partner	No
Pacific Northwest	2,700 mi	5–6 days	Flatbed	Partner	No

Units per vehicle, empty 275-gallon totes
Vehicle	Single tier	Two tier	Weight, single tier	Note
48 ft flatbed	40	80	5,480 lb	Default for 20 units and up
53 ft trailer	45	90	6,165 lb	Needs a dock or lift gate
26 ft straight truck	12	24	1,644 lb	Lift gate rating governs
16 ft box trailer	9	18	1,233 lb	Ground-level loading
20 ft shipping container	16	32	2,192 lb	Door height suits 46" formats
40 ft shipping container	36	72	4,932 lb	Floor-loaded, blocked and braced
Pickup bed, tailgate down	3	—	411 lb	Strap to the bed, not the cage top
Transit / cargo van	2	—	274 lb	Check interior height

Inside the building

What each station does

Eight stations, in the order a container passes through them.

Station sequence, inbound gate to outbound load
Station	What happens	What it produces	Equipment
1 — Scale house and gate	Certified weigh-in, declaration checked against manifest and plates	Gate weight, accept or refuse	Certified scale
2 — Quarantine row	Edible-prior separated from industrial-prior, own access and attachments	Segregated populations	Dedicated tine sleeves and dunnage
3 — Inspection bench	Backlight, sniff, frame gauge, pallet probe, valve function	Written grade before any price	Frame gauge, inspection lamps
4 — Pre-drain	Heel drained to one of four segregated tanks by product family	Classified heel, clean entry to the loop	Four heel tanks
5 — Wash bays 1–3	Ambient rinse, hot detergent or caustic CIP at 160–180°F	Washed unit + wash record	360° rotating lance, 160 psi
6 — Rebottling cell	Cage jigged, zinc repaired, new bottle fitted	Virgin contact surface, reused steel	Press jig, frame gauge
7 — Test, fit and mark	3 psi air test, new valve, gaskets, lid, cap, reconditioner mark	Test record + marking	Pressure rig, marking press
8 — Racking and loading	Photographed on the rack, staged, loaded	Photo set + delivery paperwork	Forklifts, reach truck, dock

Wash programmes run in bays 1–3

Wash programmes — temperature, chemistry, cycle time and relative cost
Code	Programme	Temperature	Chemistry	Cycle	Relative cost	Suits
P1	Ambient flood rinse	Ambient	Process water, occasional mild alkaline	90 sec	1.0×	Water-miscible residues
P2	Hot detergent	140°F	Alkaline detergent 1.5–2.5%	3 min	2.2×	Oils, fats, filming products
P3	Caustic clean-in-place	160–180°F	NaOH 2–4% + surfactant	6–9 min	4.5×	Pigments, latex, resins, heavy concentrates
PF	Food line (Bay 1)	140°F	Alkaline detergent 2% + 100% hydrostatic	3 min + test	3.1×	Documented edible prior service
Refused	Not accepted	—	—	—	—	Unknown, acute, labelled-destruction, radiological

Prior-product routing the bench works from

Our internal prior-product list, published — 110 named products
Prior product	Family	SG	Programme	Best grade	Food?	Seal	What to watch
Apple juice concentrate (70 Bx)	Food & beverage	1.35	PF	A	Yes	FDA EPDM	Best inbound stock we see; sugars rinse clean
Orange juice concentrate	Food & beverage	1.33	PF	A	Yes	FDA Viton	Citrus oil fraction can scent the bottle
Grape juice concentrate	Food & beverage	1.34	PF	A	Yes	FDA EPDM	Watch for tartrate scale at the outlet
Liquid sugar / sucrose syrup	Food & beverage	1.33	PF	A	Yes	FDA EPDM	Hot rinse only, no caustic needed
High-fructose corn syrup	Food & beverage	1.38	PF	A	Yes	FDA EPDM	Viscous; 3" outlet helps decanting
Molasses	Food & beverage	1.42	PF	A	Yes	FDA EPDM	Heated rinse; heavy heel
Honey	Food & beverage	1.42	PF	A	Yes	FDA EPDM	Crystallises; heater jacket recommended
Maple sap	Food & beverage	1.02	PF	A	Yes	FDA EPDM	Benign but sugars feed biofilm fast
Maple syrup	Food & beverage	1.33	PF	A	Yes	FDA EPDM	Hot rinse; inspect lid seat
Apple cider	Food & beverage	1.05	PF	A	Yes	FDA EPDM	Vented lid essential — ferments
Wine / must	Food & beverage	1.08	PF	A	Yes	FDA EPDM	Tartrate scale; usually leased
Beer / wort	Food & beverage	1.05	PF	A	Yes	FDA EPDM	Stainless preferred for repeat service
Brine (pickling liquor)	Food & beverage	1.20	PF	A	Yes	FDA Viton	Check cage for chloride attack
Vinegar, 10%	Food & beverage	1.01	PF	A	Yes	FDA EPDM	Easy; acid-resistant seal needed
Soy sauce	Food & beverage	1.20	PF	A	Yes	FDA Viton	Salt plus colour; monitor ghosting
Edible soybean oil	Food & beverage	0.92	P2	A	Yes	FDA Viton	140°F minimum or fat re-deposits
Edible canola oil	Food & beverage	0.91	P2	A	Yes	FDA Viton	As above
Olive oil	Food & beverage	0.92	P2	A	Yes	FDA Viton	Polyphenols can tint the wall
Glycerine, USP	Food & beverage	1.26	PF	A	Yes	FDA EPDM	Often effectively first-use stock
Propylene glycol, food grade	Food & beverage	1.04	PF	A	Yes	FDA EPDM	Frequently single-product filler stock
Liquid egg	Food & beverage	1.04	PF	A	Case by case	FDA EPDM	Protein film needs verification
Milk / dairy intermediate	Food & beverage	1.03	PF	A	Case by case	FDA EPDM	Allergen changeover record required
Whey concentrate	Food & beverage	1.06	PF	A	Case by case	FDA EPDM	Protein scale; hot detergent
Tomato paste	Food & beverage	1.10	PF	A	Yes	FDA Viton	Acidic; stains but rinses
Fruit purée	Food & beverage	1.12	PF	A	Yes	FDA EPDM	Pulp load; coarse settling matters
Flavour concentrate / essence	Food & beverage	0.95	Refused	Rebottle	No	PTFE	Permeates HDPE permanently — use stainless
Citrus terpene oil	Food & beverage	0.84	Refused	Recycle	Never	PTFE	One batch ends a poly bottle's usefulness
Spent grain slurry	Food & beverage	1.05	P2	B	No	EPDM	By-product duty; 3" outlet strongly advised
Yeast slurry	Food & beverage	1.08	P2	B	Case by case	EPDM	Vent — active fermentation
UAN 32 liquid nitrogen	Agricultural	1.32	P1	B	Never	EPDM	Rinses readily; dense — check ratings
UAN 28	Agricultural	1.28	P1	B	Never	EPDM	As above
Liquid starter 10-34-0	Agricultural	1.38	P1	B	Never	EPDM	Polyphosphate scale at the outlet
Ammonium thiosulphate	Agricultural	1.33	P1	B	Never	EPDM	Sulphur odour persists faintly
Potassium thiosulphate	Agricultural	1.47	P1	B	Never	EPDM	Very dense; 275 format only
Calcium nitrate solution	Agricultural	1.43	P1	B	Never	EPDM	Crystallises when cold
Humic / fulvic acid	Agricultural	1.10	P2	B	Never	EPDM	Dark staining, usually washes out
Fish hydrolysate fertiliser	Agricultural	1.12	P3	C	Never	Viton	Odour frequently permanent
Foliar micronutrient blend	Agricultural	1.25	P1	B	Never	EPDM	Metal salts can tint the wall
Glyphosate concentrate	Agricultural	1.17	P3	C	Never	Viton	Labelled rinse programme governs
2,4-D amine concentrate	Agricultural	1.19	Refused	Per label	Never	Viton	Label prescribes rinse-and-destroy
Crop oil adjuvant	Agricultural	0.88	P3	C	Never	Viton	Attacks EPDM; permeates slowly
Surfactant adjuvant (NIS)	Agricultural	1.03	P1	B	Never	EPDM	Foams heavily on transfer
Molluscicide suspension	Agricultural	1.22	Refused	Per label	Never	Viton	Refused — labelled destruction
Livestock drinking water	Water & inert	1.00	P1	A	Yes	EPDM	Effectively first-use
Irrigation water	Water & inert	1.00	P1	A	Yes	EPDM	May carry silt; coarse settling
Sodium hydroxide 50%	Industrial chemistry	1.52	P1	B	Never	EPDM	3,497 lb filled — check every rating
Sodium hydroxide 25%	Industrial chemistry	1.27	P1	B	Never	EPDM	Easy wash; dilute and drain
Potassium hydroxide 45%	Industrial chemistry	1.46	P1	B	Never	EPDM	As NaOH; dense
Sulphuric acid 93%	Industrial chemistry	1.83	Refused	Dedicated	Never	PTFE	4,182 lb filled; dedicated service only
Sulphuric acid 35%	Industrial chemistry	1.26	P1	C	Never	PTFE	Fume attack on cage galvanising
Hydrochloric acid 31%	Industrial chemistry	1.16	P1	C	Never	PTFE	Cage usually the limiting factor
Phosphoric acid 75%	Industrial chemistry	1.58	P1	B	Never	PTFE	Dense; viscous at low temperature
Nitric acid 42%	Industrial chemistry	1.26	Refused	Dedicated	Never	PTFE	Oxidiser — embrittles HDPE
Hydrogen peroxide 35%	Industrial chemistry	1.13	P1	B	Case by case	PTFE	Vent; absolutely no contaminants
Sodium hypochlorite 12%	Industrial chemistry	1.21	P1	B	Never	EPDM	Degasses; vent and shield from UV
Ferric chloride 40%	Industrial chemistry	1.42	P2	C	Never	Viton	Heavy orange staining is permanent
Aluminium sulphate	Industrial chemistry	1.33	P1	B	Never	EPDM	Scale at the outlet boss
Polyaluminium chloride	Industrial chemistry	1.35	P1	B	Never	EPDM	Gels if allowed to dry out
Propylene glycol coolant	Industrial chemistry	1.04	P1	B	Never	EPDM	Ideal duty; nothing to watch
Ethylene glycol	Industrial chemistry	1.11	P1	B	Never	EPDM	Toxic — never re-grade for potable
Calcium chloride brine 32%	Industrial chemistry	1.38	P1	B	Never	Viton	Chloride attack on lower cage
Magnesium chloride de-icer	Industrial chemistry	1.32	P1	B	Never	Viton	As above; rinse frames each spring
Potassium acetate de-icer	Industrial chemistry	1.28	P1	B	Never	EPDM	Benign; airport runway chemistry
Urea solution (DEF)	Industrial chemistry	1.09	P1	B	Never	EPDM	Purity-critical next fill; usually dedicated
Nickel plating solution	Industrial chemistry	1.25	Refused	Recycle	Never	Viton	Metal-bearing; never re-used
Chromic acid solution	Refused	1.30	Refused	Refused	Never	PTFE	Not accepted at the gate
Cyanide plating bath	Refused	1.15	Refused	Refused	Never	PTFE	Acutely hazardous — licensed facility only
Phosphate conversion coating	Industrial chemistry	1.22	P2	C	Never	Viton	Scale and staining
Amine corrosion inhibitor	Industrial chemistry	0.98	P2	B	Never	Viton	Fish-like odour can persist
Sodium silicate	Industrial chemistry	1.39	P3	C	Never	EPDM	Sets hard if dried; wash promptly
Polymer flocculant emulsion	Industrial chemistry	1.02	P3	C	Never	EPDM	Extremely slippery; gels with water
Sodium bisulphite	Industrial chemistry	1.33	P1	B	Never	EPDM	Sulphur odour; vent
Antifoam silicone emulsion	Industrial chemistry	1.00	P3	C	Never	Viton	Film is very hard to remove
Latex paint, white	Coatings & inks	1.30	P3	C	Never	EPDM	Heavy ghosting; often rebottle
Latex paint, tinted	Coatings & inks	1.32	P3	C	Never	EPDM	Pigment ghosting permanent
Water-based pigment dispersion	Coatings & inks	1.25	P3	C	Never	EPDM	Strong colour transfer into the wall
Flexographic ink	Coatings & inks	1.08	P3	Rebottle	Never	Viton	Resin binder plasticises the surface
UV-curable coating	Coatings & inks	1.10	Refused	Recycle	Never	PTFE	Cures in the bottle; not washable
Acrylic adhesive emulsion	Coatings & inks	1.08	P3	Rebottle	Never	EPDM	Caustic at 180°F, often still ghosts
PVA wood adhesive	Coatings & inks	1.09	P3	C	Never	EPDM	Wash before it skins over
Polyurethane resin, 2-part	Coatings & inks	1.12	Refused	Recycle	Never	PTFE	Cross-linked; nothing shifts it
Asphalt emulsion	Coatings & inks	1.01	P3	C	Never	Viton	Hot caustic plus long dwell
Concrete release agent	Coatings & inks	0.89	P2	C	Never	Viton	Oily film; 140°F detergent
Mineral oil, hydraulic	Oils & fuels	0.88	P3	B	Never	Viton	Permeation; faint odour often remains
Cutting fluid, soluble	Oils & fuels	0.92	P3	B	Never	Viton	Bacterial odour is the real problem
Gear oil	Oils & fuels	0.90	P3	C	Never	Viton	Heavy film; two cycles common
Used motor oil	Refused	0.89	Refused	Recycle	Never	Viton	Waste stream — not accepted for reuse
Diesel fuel	Oils & fuels	0.85	Refused	Recycle	Never	Viton	Permanent odour; bottle compromised
Kerosene	Oils & fuels	0.81	Refused	Recycle	Never	Viton	As diesel
Biodiesel B100	Oils & fuels	0.88	P3	C	Never	Viton	Solvency attacks some HDPE grades
Vegetable-based lubricant	Oils & fuels	0.92	P2	B	Never	Viton	Oxidises to a varnish if left
Anionic surfactant concentrate	Cleaning & sanitation	1.05	P1	B	Never	EPDM	It is soap — rinses, but foams
Non-ionic surfactant	Cleaning & sanitation	1.03	P1	B	Never	EPDM	Easy wash
Alkaline degreaser	Cleaning & sanitation	1.10	P1	B	Never	EPDM	Compatible with our own loop
Acid descaler	Cleaning & sanitation	1.14	P1	B	Never	PTFE	Segregate heel from caustic tanks
Quaternary ammonium sanitiser	Cleaning & sanitation	1.01	P1	B	Case by case	EPDM	Residual actives need verification
Peracetic acid sanitiser	Cleaning & sanitation	1.12	P1	B	Case by case	PTFE	Oxidiser; vent and shield
Hand sanitiser (ethanol 70%)	Cleaning & sanitation	0.87	P1	B	Case by case	Viton	Alcohol flashes off; little residue
Laundry detergent, liquid	Cleaning & sanitation	1.06	P1	B	Never	EPDM	Optical brighteners can tint
Car wash soap concentrate	Cleaning & sanitation	1.04	P1	B	Never	EPDM	Very common inbound stock
Floor finish / wax emulsion	Cleaning & sanitation	1.02	P3	C	Never	EPDM	Films hard; wash before it dries
Potable water	Water & inert	1.00	P1	A	Yes	FDA EPDM	Frequently first-use stock
Deionised water	Water & inert	1.00	P1	A	Yes	FDA EPDM	Best-value first-use source
Distilled water	Water & inert	1.00	P1	A	Yes	FDA EPDM	As above
Glycerine, technical	Water & inert	1.26	P1	B	No	EPDM	Technical grade is not food grade
Saline solution, industrial	Water & inert	1.07	P1	B	Never	Viton	Chloride; inspect cage
Unknown or mixed residue	Refused	—	Refused	Refused	Never	—	Safety assessment, not a grading question
RCRA P-listed residue	Refused	—	Refused	Refused	Never	—	Licensed treatment facility only
Radiological material	Refused	—	Refused	Refused	Never	—	No testing, no discussion
Pesticide, labelled destruction	Refused	—	Refused	Refused	Never	—	Service life ended by regulation

Grades assigned at station 3

Grades A, B and C against cage-only — what each one permits
	Grade A	Grade B	Grade C	Cage / pallet only
Bottle clarity	Clear / near-clear	Haze & staining permitted	Ghosting permitted	n/a
Prior service	Documented edible, signed at source	Industrial, declared	Industrial, declared	Any declared
Wash programme	Food line, recorded	Programme to residue, recorded	Ambient rinse	Cage rinse only
Hydrostatic test	100% of units	Sampled	Sampled	n/a
New valve & gaskets	Yes, FDA-compliant	Yes	Sound or new	n/a
New lid	Yes	Yes	Sound or new	n/a
Re-marked	Yes	Yes	Where the plate survives	No
Stackable when filled	2 high	2 high	No	n/a
30-day leak warranty	Yes	Yes	No — watertight at loading	No warranty
Food / potable	Yes, with records	No	No	n/a
Cost vs new	≈ 35–45%	≈ 25–32%	≈ 18–24%	≈ 5–10%
Lead time	Ex-stock to 5 days	Ex-stock	Ex-stock	Ex-stock
Loop score (lives left)	5–6	4–5	2–3	3–4 bottles

Failure modes that reject a unit

Failure modes on the inspection bench — 10 distinguishable causes
Mode	Cause	What it looks like	Recoverable?	Prevention	Frequency
UV embrittlement	Unshaded outdoor storage	Chalky, boardy, higher-pitched tap	No	Cover or shade it	Most common
Stress whitening at the radius	Over-fill, freeze, uneven ground	White crackled lower corners	No	Level pad, respect max gross mass	Common
Plasticisation & ghosting	Pigment, resin, solvent absorption	Permanent shadow when backlit	Rebottle	Match chemistry to material	Common
Freeze damage	Left full and sealed	Bulged panel, split seam, blown boss	Sometimes fittings only	Drain or 2/3 fill, vented lid	Seasonal spike
Valve boss cracking	Unsupported pump or rigid pipe	Star crazing at the boss root	No — rebottle	Support the pump separately	Avoidable
Impact puncture	Forklift tine, drop, collision	Hole or deep gouge	No	Handling discipline	Rare
Cage racking	Soft ground, foot impact, over-fill	Diagonals differ by > 1/2"	Jig if under 1/2"	Level load-bearing pad	Common
Weld node cracking	Fatigue, previous field weld	Rust bloom then crack	No	Never field-weld a cage	Occasional
Pallet rot / delamination	Timber base outdoors	Soft bearers, split deck	Replace base	Specify steel or composite	Very common
Seal failure	Compression set, wrong elastomer, reuse	Weeping at the boss or lid	Yes — new seal	Replace at every product change	71% of reports

Documents produced across the sequence

Documents we issue — 14 of them, as standard rather than on request
Document	What it contains	When you get it
Written quotation	Unit price by grade, freight as its own line, validity, and the conditions that would change it	Before you order
Grade certificate	Assigned grade against our published definitions, per unit serial	With the order
Leak & pressure test record	Test pressure, hold time, outcome, per serial	With the order
Hydrostatic test certificate	100% of food-line units, recorded against serial	Food-grade orders
Prior-contents declaration	Named last product, generating site, signature	Anything we collected
Wash programme record	Bay, programme, temperature, chemistry, cycle time	Reconditioned & contract work
Rinse verification	Final-rinse pH and conductivity	Reconditioned & contract work
Component specification	Valve, gasket, lid materials with compliance references	Food-grade orders
Photograph set	The actual units on the rack before loading	Every order
Weight ticket	Certified-scale gross weight and count	Collections and cleanouts
Diversion certificate	Unit counts, weights by stream, destination routes, dates	End-of-life batches
Certificate of insurance	GL, auto, cargo, workers' comp; additional insured	Before a crew arrives
Reconditioner marking detail	Code, date, design type	Re-marked units
Lease schedule	Count, grade, dates, weekly rate, return condition, replacement charge	Leases

Diversion outcome of the whole line

Inbound weight, diversion and manifested residue, year by year
Year	Units in	Diversion	Manifested	Notable change
2019	19,400	88.2%	11.8%	Closed-loop water train commissioned
2020	26,800	90.6%	9.4%	Food line run six days a week
2021	24,100	92.4%	7.6%	Upcycled builds workshop opened
2022	27,300	94.1%	5.9%	Lease pool launched
2023	29,600	96.1%	3.9%	Diversion certificates formalised
2024	31,200	96.8%	3.2%	Stainless stream added
2025	33,900	97.4%	2.6%	Sludge dewatering upgraded

The site

310 Emig Rd, photographed

Covered process area, outdoor racking and the quarantine rows, in the order a container passes through them.

Rows of clean reconditioned IBC totes stacked inside the covered process building — **Inside the covered area**18,400 square feet, three wash bays and the rebottling cell. Graded stock is racked two high by grade and capacity, and photographed on the rack before it ships.

Used IBC totes staged outdoors beside the yard building before washing — **Staged for the line**Edible-prior stock holds its own row with separate access, forklift attachments and dunnage. Bay 1 has never run an industrial caustic programme.

A wide view of the outdoor yard holding hundreds of IBC totes — **The outdoor yard**4.1 acres, paved apron to the scale house and compacted stone beyond. In a hard freeze the main lane is graded and salted by 6:30 AM.

310 Emig Rd, bay by bay

Book a yard visit

The route a container takes through the site

We run our own lanes, which is why delivered prices make sense

Transport & freight

Site cleanouts

Directions & hours

Why York County

Visiting

Related pages

The reconditioning line

Certifications & compliance

Our story

Capacity, equipment and coverage

What each station does

310 Emig Rd, photographed